Transactions of the Royal Institution of Naval Architects: 1877, Volume 18Royal Institution of Naval Architects., 1877 - Naval architecture List of members in each volume. |
Contents
| 1 | |
| 3 | |
| 24 | |
| 37 | |
| 50 | |
| 69 | |
| 77 | |
| 98 | |
| 247 | |
| 251 | |
| 264 | |
| 270 | |
| 280 | |
| 294 | |
| 303 | |
| 310 | |
| 118 | |
| 135 | |
| 155 | |
| 168 | |
| 178 | |
| 191 | |
| 201 | |
| 216 | |
| 230 | |
| 241 | |
| 315 | |
| 318 | |
| 327 | |
| 336 | |
| 349 | |
| 361 | |
| 379 | |
| 385 | |
| 397 | |
Other editions - View all
Common terms and phrases
Admiralty amount angle armour ballast Barnaby beam bilge boats boiler breadth bulkheads buoyancy calculations Captain cargo carried cast iron centre coal compound engines consideration construction curve cylinders deck Denny depth diagram diameter displacement effect experience factor of safety feet floating friction Froude Gentlemen girder give Glasgow gunwale increase indicated horse-power Institution of Naval iron John keel knots launching length Lloyd's Lloyd's Registry load LORD HAMPTON marine Meeting Member of Council merchant ships Messrs metacentric height midship Naval Architects Navy neutral axis ordinary Paper plates pounds practical present President pressure propeller proportion question Reed resistance rivets Royal Navy safety Samuda scantlings screw shipbuilding shipowners side speed square inch stability steam steam ships steamers steel strains surface Thames Iron thickness tons per square torpedoes transverse waves valve vessel Vice-President wave weight wrought iron
Popular passages
Page xvii - It shall be the duty of the Secretary, under the direction of the Council, to conduct the correspondence of the Institution ; to attend all meetings of the Institution, and of the Council, and of Committees ; to take minutes of the proceedings of such meetings ; to read the minutes of the preceding...
Page xix - Appendix to the person proposed to be expelled, advising him to withdraw from the Institution. If that advice be followed, no entry on the minutes, nor any public discussion on the subject, shall be permitted ; but if that advice be not followed, nor a - satisfactory explanation given, the Council shall call a Special General Meeting of Members...
Page 292 - They that go down to the sea in ships : and occupy their business in great waters; These men see the works of the Lord : and his wonders in the deep.
Page xvi - But in case of the absence of the President and of all the VicePresidents, the Meeting may elect any member of Council, or, in case of their absence, any Corporate Member present, to take the chair at the Meeting.
Page xvi - Section 9. In the absence of the president, one of the vicepresidents shall preside, with the same power as the president, and if no president or vice-president be present, the society shall elect a member to preside temporarily.
Page 350 - ... stream relatively to the ship in knots; the real slip, or part of that speed which is impressed on that stream by the propeller, also in knots ; and the constant 5-66/or sea-water, or 5-5 for fresh water.
Page xix - Members and Associates for the purpose of deciding on the question of expulsion ; and if a majority of the persons present at such Special General Meeting, provided the number so present be not less than...
Page xvi - Institution, and of the receipts and payments of the past year, shall be made under the direction of the Council, and after having been verified and signed by the Auditors, shall be laid before the Annual General Meeting.
Page xxii - Members, and they think fit to draw up and sign a proposal requiring such expulsion, the same being delivered to the Secretary, shall be by him laid before the Council for consideration. If the Council, after due inquiry, do not find reason to concur in the proposal, no entry thereof shall be made in any Minutes, nor shall any public discussion thereon be permitted; but if the Council do find good reason for the proposed expulsion, they shall direct the Secretary to address a letter, according to...
Page 393 - Strips cut lengthwise or crosswise of the plate, and also angle and bulb steel, to have an ultimate tensile strength of not less than 27, and not exceeding 31 tons per square inch of section, with an elongation corresponding to .20 per cent.